ZED ZIEGLER ELECTRONIC DEVICES DISTRIBUTION

Components for UV-Systems

• electronic ballasts for low-pressure and amalgam UV-lamps:
  • electronic ballasts with integrated hour counter and UV-monitoring,
  • electronic ballasts with lamp operation control via RS485,
  • electronic ballasts with adjustable operation parameters,
• standard and special UV-lamps,
• control units for UV systems,
• UV-sensors and UV-monitors for the measurement of relative and absolute uv-intensity, hour counting, status indication...
• special accessories for measurement technique, e.g. subcontroller for PLC
• custom-tailored control systems for the domain of water- , air- and process technology

For the special requirements of our customers we offer customized solutions. Our devices show high reliability in world-wide applications. As partners of the manufacturers of systems and devices we are able to respond fast and flexible with our team.

Features  - CONTACT US for use in UV-C monitoring systems (for UV values in "%") cost efficient for low budget projects insensitive to daylight photodiode signal - external amplification required

Installation data sensitive element: SiC diode spectral range: 210 - 380nm (220 - 290nm with UVC filter on request) operation temperature: 0 - 40°C (32 - 104°F) max. pressure: 10bar at front (except SiC-SV01-PG) body material : stainless steel, PTFE (depending on sensor type) mounting: x001: pipe thread ISO228 G¼ (use MF001-A to adapt to G1) x003: pipe thread ISO228 G¾ wiring: ready-to-use ZED sensor cables available in several lengths

Features  - CONTACT US for use in UV-C monitoring systems (for UV values in "W/m²", "mW/cm²" or "%") one sensor for all applications: low pressure: range 2...500W/m² medium pressure: range 20...3000W/m² fail safe signal transmission regardless of cable length multi sensor operation using one cable by connecting additional sensors to the RS485 bus

Installation data supply voltage: 12...24V DC sensitive element: SiC diode spectral range: 210 - 380nm (220 - 290nm with UVC filter on request) operation temperature: 0 - 40°C (32 - 104°F) max. pressure: 10bar at front body material : stainless steel, PTFE (depending on sensor type) mounting: x131/x141: pipe thread ISO228 G¼ (use MF001-A to adapt to G1) x133: pipe thread ISO228 G¾ wiring: ready-to-use ZED sensor cables available in several lengths

Features  - CONTACT US for use in UV-C monitoring systems (for UV values in "%") indirect "side-looking" UV-C detection - sensor is positioned alongside the lamps for low pressure applications - wide intensity range due to automated measuring range selection fail safe signal transmission regardless of cable length multi sensor operation using one cable by connecting additional sensors to the RS485 bus

Installation data supply voltage: 12...24V DC sensitive element: SiC diode spectral range: 210 - 380nm (220 - 290nm with UVC filter on request) aperture angle: approx. 110° (laterally round) (220 - 290nm with UVC filter on request) operation temperature: 0 - 40°C (32 - 104°F) IP code: IP40 body material : stainless steel (sensor head: PTFE) mounting: to be mounted in a quartz tube dimensions: sensor body: Ø20mm x 65mm sensor head: Ø14mm x 15mm cable protection tube: Ø8mm x 500mm wiring: ready-to-use ZED sensor cables available in several lengths

Features  - CONTACT US for use in UV-C monitoring systems (for UV values in "W/m²", "mW/cm²" or "%") one sensor for all applications: low pressure: range 2...500W/m² medium pressure: range 20...3000W/m² 100% reference value for analog signal output can be set by customer using ZCONpro integrated signal converter measurement and display of absolute UV values using ZCONpro

Installation data supply voltage: 12...24V DC (min. 15V DC for U10 types) sensitive element: SiC diode spectral range: 210 - 380nm (220 - 290nm with UVC filter on request) operation temperature: 0 - 40°C (32 - 104°F) max. pressure: 10bar at front body material : stainless steel, PTFE (depending on sensor type) mounting: x131/x141: pipe thread ISO228 G¼ (use MF001-A to adapt to G1) x133: pipe thread ISO228 G¾ wiring: ready-to-use ZED sensor cables available in several lengths

Features    - CONTACT US for use in UV-C monitoring systems (for UV values in "W/m²", "mW/cm²" or "%") special adjustment depending on respective UV systems according to customers specification integrated signal amplifier

Installation data supply voltage: 12...24V DC (min. 15V DC for U10 types) sensitive element: SiC diode spectral range: 210 - 380nm (220 - 290nm with UVC filter on request) operation temperature: 0 - 40°C (32 - 104°F) max. pressure: 10bar at front body material : stainless steel, PTFE (depending on sensor type) mounting: x131/x141: pipe thread ISO228 G¼ (use MF001-A to adapt to G1) x133: pipe thread ISO228 G¾ wiring: ready-to-use ZED sensor cables available in several lengths

Features   -  CONTACT US for use in certified UV-C monitoring systems use D-SiCONORM types as certified UV sensors UV-C intensity measurement in W/m² compliant to Austrian standards ÖNORM M5873-1 and Vornorm ÖNORM M5873-2 (sensors are certified by ÖNORM) German standard DVGW W294 in combination with measurement window MF001 one sensor for all applications: low pressure: range 2...500W/m² medium pressure: range 20...3000W/m² fail safe signal transmission regardless of cable length multi sensor operation using one cable by connecting additional sensors to the RS485 bus

Installation data supply voltage: 12...24V DC sensitive element: SiC diode spectral range: 210 - 290nm operation temperature: 0 - 40°C (32 - 104°F) max. pressure: 10bar on using with measurement window MF001 (not waterproof without MF001 body material: stainless steel mounting: use with MF001 (MF001: pipe thread ISO228 G1) wiring: ready-to-use ZED sensor cables available in several lengths

CONTACT US